High-current Dual Row Connectors for Heavy-duty and Space-saving Connections
By:Admin
ERNI Electronics, a leading global provider of electronic connectors, announces the launch of MaxiBridge dual row connectors, a new range of 10-pin or 20-pin connectors with a current carrying capacity of up to 12 A per contact on a 2.54 mm grid. The new connectors are ideal for heavy duty and space-saving connections between circuit boards and external devices. They enable engineers to make high-density connections in applications where space may be limited, without sacrificing performance or reliability.
The MaxiBridge dual row connectors are available in a range of configurations, including straight and angled male connectors fitted with SMT termination, and female connectors with 180 outgoing cable units and corresponding contact chambers for crimp contacts. Cable cross-sections of AWG 18 to AWG 26 can be processed.
Designed for use in a range of industries, including automotive, telecommunications, industrial, and medical technology, the new connectors are a highly versatile solution for engineers looking to achieve high-density connections without sacrificing on performance. They have been specifically engineered to provide reliable, high-performance connectivity in demanding environments and are therefore particularly suitable for use in harsh industrial and automotive environments.
Features and Benefits
The MaxiBridge dual row connectors feature a number of advanced design features and benefits, including:
Pitch: 2.54 mm
Number of pins: 2 x 5; 2 x 10
Current carrying capacity per contact: up to 12 A
Connection: Male Connector SMT, Female Connector crimp
Discrete stranded wires AWG 18, 20, 22, 24, 26
Straight and angled Male Connector
Coplanarity of the male contacts including solder clips < 0.1 mm
Female Connector with 180 cable outlet
Dual locking of crimp contacts
4 colored housing codes
Tough locking of Male and Female Connector
MaxiBridge Dual Row Connectors from ERNI Electronics are an excellent solution for applications that require high-density, reliable, and high-performance connectivity. With their high current carrying capacity, low profile design, and dual-row configuration, these connectors are perfect for use in industrial automation and control systems, automotive electronics, and telecommunications equipment. Their rugged design and superior electrical characteristics make them ideal for use in applications such as power distribution systems, machine control systems, and factory automation equipment.
Product Availability
MaxiBridge dual row connectors from ERNI Electronics are available now. For more information about these connectors and other products from ERNI Electronics, visit their website or contact one of their sales representatives.
Company News & Blog
Easy Guide to Car Dent Repair: Step by Step Tips with Limited Availability
Car batteries are arguably one of the most important components of a vehicle. They are responsible for providing the necessary electrical energy to start the engine, keep the lights on, and power the various electrical components and accessories found in modern cars. However, like all mechanical components, car batteries are not immune to wear and tear, and they often require maintenance and replacement.Fortunately, maintaining and replacing a car battery is not rocket science, and with a little bit of knowledge and some basic tools, anyone can do it in their driveway or garage. To help car owners, a leading automotive company Brand Name Removed is offering a limited-time car battery tips guide to the first 500 customers.The guide, which is designed for both novice and experienced car owners alike, walks through the steps of how to properly maintain and replace a car battery. It includes tips on how to identify signs of a failing battery, how to remove and replace the old one, what to look for when buying a new battery, and how to properly install and maintain the new one.The company spokesperson said, At Brand Name Removed, we understand how important it is to have a reliable car, and the battery is a critical component of that. We want to help our customers take care of their cars, and that's why we're offering this free guide to the first 500 customers. We're confident that the guide will help car owners save money and time by avoiding unnecessary visits to the mechanic and extending the lifespan of their car batteries.In addition to the car battery tips guide, Brand Name Removed is also offering a comprehensive range of car batteries that are designed to meet the needs of different vehicle models and driving conditions. The batteries are made of high-quality materials and come with a warranty, providing car owners with peace of mind.The spokesperson added, We aim to provide our customers with the best possible products and services that meet their needs and expectations. Our car batteries are made to perform reliably and efficiently in different weather conditions and driving situations, making them a great investment for car owners who value quality and longevity.In conclusion, taking care of a car battery is essential for ensuring the proper functioning and longevity of a vehicle. With the help of the car battery tips guide offered by Brand Name Removed, car owners can save money and time by taking care of their batteries themselves, instead of relying on mechanics. Additionally, the comprehensive range of high-quality batteries offered by Brand Name Removed provides car owners with the peace of mind of knowing that their cars will start every time and run smoothly.
China Pin Header Suppliers offer High-Quality Pin Headers at Competitive Prices
Connector Pin Header: A Comprehensive GuideWhen it comes to electronic connectors, one of the most common types is the pin header. A pin header, also referred to as a connector pin header, is a component that facilitates connection between two printed circuit boards. It consists of multiple pins arranged in a row, usually with a plastic base that holds them together.In this blog, we will provide an in-depth guide on connector pin headers, including their types, applications, and benefits. We will also introduce you to a reliable pin header manufacturer and supplier based in China.Types of Connector Pin HeadersThere are different types of pin headers available in the market. They vary in terms of pitch, number of pins, orientation, and mounting style. Below are some of the most common types:1. Single-row Pin Headers: As the name suggests, these connectors have only one row of pins. They are commonly used in PCB-to-PCB connections where space is limited.2. Dual-row Pin Headers: These connectors have two rows of pins, which provide more contacts for high-density applications. They are commonly used for connecting display units, memory modules, and other high-speed devices.3. Right-angle Pin Headers: These connectors have pins that exit from the side of the plastic base at a right angle. They are ideal for applications where space is limited or where the connector needs to be mounted perpendicular to the PCB.4. Straight Pin Headers: These connectors have pins that exit from the plastic base in a straight line. They are ideal for applications where the connector needs to be mounted parallel to the PCB.Applications of Connector Pin HeadersConnector pin headers are used in various industries and applications, including:1. Consumer Electronics: These connectors are commonly used in smartphones, tablets, laptops, and other electronic devices for power and data transfer.2. Automotive and Aerospace: Pin headers are used in applications that require high reliability and durability, such as in airbags, GPS systems, and engine control modules.3. Medical Devices: These connectors are used in medical devices that require high accuracy and precision, such as glucose meters, heart monitors, and MRI machines.Benefits of Connector Pin HeadersThere are several benefits of using connector pin headers, including:1. Easy Installation: Pin headers require no special tools or expertise to install.2. Versatility: Pin headers can be used for a variety of applications and can be easily customized to fit specific requirements.3. High Reliability: Pin headers have secure connections that ensure reliable data transfer and power delivery.4. Cost-Effective: Compared to other connectors, pin headers are cost-effective and can be mass-produced.A Reliable Pin Header Manufacturer and SupplierIf you are in search of a reliable pin header manufacturer and supplier, then Shenzhen (brand name removed) Technology Co., Ltd. is your best bet. As a China-based manufacturer, they offer a wide range of pin headers that are suitable for various applications. Their pin headers come in different sizes, pitches, and orientations and can be customized to fit specific requirements.ConclusionConnector pin headers are versatile, easy to install, and cost-effective. They are widely used in various industries and applications that require a reliable and secure connection. With the right manufacturer and supplier, you can find the perfect connector pin header for your specific needs.
Can SEC and Ground Wires Be Connected Through Same Clamp Connector in Main Service Panel? - Electrical Inspections
When it comes to ensuring the safety and efficiency of any electrical installation, several factors come into play. One crucial aspect is the correct use and placement of connectors that secure the electrical wires in place.One type of connector commonly used in the electrical industry is the clamp connector, which joins multiple wires together while providing secure clamping and strain relief. Clamp connectors are available in a range of sizes and materials, with different configurations for specific applications.In a recent news content, the topic of whether it's permissible to allow the Service Entrance Cable (SEC) and ground wires to enter the main service panel through the same hole/under the same connector was discussed. The answer is yes, it is allowed, but only if certain requirements are met.According to the National Electric Code (NEC), the grounding conductor and the grounded conductor must be separated and isolated from each other at the service equipment. This requirement ensures that not only are the grounded and grounding conductors separated, but the grounded conductor (neutral) is also grounded in only one location. All other grounding conductors should be connected to the same grounding point.Under certain conditions, however, it is permissible to enter the service panel in the same hole or through the same clamp connector. For example, in a panel where the neutral conductor is connected to the enclosure and used as a grounding conductor, it is acceptable to enter both conductors through the same hole or connector.Another acceptable scenario for using the same clamp connector is where the ground and neutral wires are insulated and identified, making it easy to tell them apart. In this case, you can use a two-wire clamp connector, with one for the neutral and the other for the ground.It's essential to note that in either arrangement, the conductor materials must be appropriately insulated, allowing only insulation to come into contact with the clamp connector. The insulation chosen should be of approved type, providing the necessary tensile strength required to hold the cables in place, as well as its resistance to weathering, aging, and heat.The use of high-quality clamp connectors in electrical installations ensures proper wire management and stability while also contributing to lasting performance. Investing in quality electrical connectors is a practical choice, providing peace of mind in knowing that your installation has been properly inspected, and all necessary precautions have been taken to ensure its safety.In conclusion, while it is permissible to allow the SEC and ground wires to enter the main service panel through the same hole/under the same connector, certain requirements must first be met, as outlined per NEC guidelines. It is always best to seek professional advice and ensure compliance with local and national electrical code standards to avoid any safety hazards.
High-current Dual Row Connectors for Heavy-duty and Space-saving Connections
ERNI Electronics Launches MaxiBridge Dual Row Connectors with High Current Carrying Capacity for Heavy Duty and Space Saving ConnectionsERNI Electronics, a leading global provider of electronic connectors, announces the launch of MaxiBridge dual row connectors, a new range of 10-pin or 20-pin connectors with a current carrying capacity of up to 12 A per contact on a 2.54 mm grid. The new connectors are ideal for heavy duty and space-saving connections between circuit boards and external devices. They enable engineers to make high-density connections in applications where space may be limited, without sacrificing performance or reliability.The MaxiBridge dual row connectors are available in a range of configurations, including straight and angled male connectors fitted with SMT termination, and female connectors with 180 outgoing cable units and corresponding contact chambers for crimp contacts. Cable cross-sections of AWG 18 to AWG 26 can be processed.Designed for use in a range of industries, including automotive, telecommunications, industrial, and medical technology, the new connectors are a highly versatile solution for engineers looking to achieve high-density connections without sacrificing on performance. They have been specifically engineered to provide reliable, high-performance connectivity in demanding environments and are therefore particularly suitable for use in harsh industrial and automotive environments.Features and BenefitsThe MaxiBridge dual row connectors feature a number of advanced design features and benefits, including:Pitch: 2.54 mmNumber of pins: 2 x 5; 2 x 10Current carrying capacity per contact: up to 12 AConnection: Male Connector SMT, Female Connector crimpDiscrete stranded wires AWG 18, 20, 22, 24, 26Straight and angled Male ConnectorCoplanarity of the male contacts including solder clips < 0.1 mmFemale Connector with 180 cable outletDual locking of crimp contacts4 colored housing codesTough locking of Male and Female ConnectorMaxiBridge Dual Row Connectors from ERNI Electronics are an excellent solution for applications that require high-density, reliable, and high-performance connectivity. With their high current carrying capacity, low profile design, and dual-row configuration, these connectors are perfect for use in industrial automation and control systems, automotive electronics, and telecommunications equipment. Their rugged design and superior electrical characteristics make them ideal for use in applications such as power distribution systems, machine control systems, and factory automation equipment.Product AvailabilityMaxiBridge dual row connectors from ERNI Electronics are available now. For more information about these connectors and other products from ERNI Electronics, visit their website or contact one of their sales representatives.
Easy Guide to Car Dent Repair with Limited Availability - Learn Today
Taking care of your car is not just about maintaining its efficiency and performance. It's also important to keep it looking good, including ensuring that it's free from dents and scratches. While dents on a car can be quite frustrating, getting them repaired at a car repair shop can be expensive. But, did you know that you can easily repair dents on your car battery using a battery pin and a few simple steps? In this blog post, we will guide you through easy steps to repair car battery dents.Firstly, it's vital to explain what a battery pin is. A battery pin is a tool designed to make it easier to remove dents on car batteries. It consists of a metallic rod with a pointed end and a flat end. The pointed end is used to create a small hole in the dent, while the flat end is used to pull the dent out from the inside. This tool is readily available online and in most car spare part shops.Now that you know what a battery pin is, let's dive straight into the steps involved in repairing car battery dents:Step one: Clean the battery carefully.Before you get started with the dent repair, ensure that your battery is clean. Using a clean rag soaked in a mild detergent solution, wipe the battery gently to remove any dirt, grease, or grime that can interfere with the dent repair process. Dry it thoroughly using a clean towel.Step two: Identify the dent.Once the battery is clean, locate the dent on it. Ensure that the dent is not too deep or large. If the dent is too deep or large, it may require professional repair or even replacement of the battery. If the dent is small or shallow, you can quickly fix it using the battery pin.Step three: Use the pointed end of the battery pin to make a hole in the center of the dent.Position the pointed end of the battery pin at the center of the dent and gently tap it with a hammer. The objective is to make a hole in the dent so that you can use the flat end of the pin to pull it out. Be careful not to use too much force to avoid further damaging your battery.Step four: Use the flat end of the battery pin to pull the dent out.Once you've made a hole in the center of the dent, reverse the battery pin and push the flat end into the hole. Push it outwards gently until the dent pops out. If necessary, repeat this process until the dent is no longer visible.Step five: Sand the area around the dent.After you've removed the dent, use sandpaper to sand the area around the hole gently. Sanding will help remove any rough edges and make the area around the dent smooth and clean. Then, clean the battery again to remove any debris from the sanding process.In conclusion, fixing dents on your car battery is an easy and inexpensive process that you can do yourself with a little bit of effort. By using a battery pin and following the above simple steps, you can repair the dents and your car battery will look as good as new again. However, if the dent is too severe or deep, consider seeking assistance from a professional mechanic or replace it altogether. Happy dent removal!
Expert Answers to Your Electrical Engineering Questions on Q&A Forum
Board to Board Connector: The Future of ElectronicsElectronic devices have become an integral part of our lives. From smartphones to laptops to gaming consoles, we rely on electronics for our entertainment, communication, and work. However, have you ever thought about what connects these electronic devices? Board to board connectors are the key to ensuring that these devices work seamlessly together.Board to board connectors, also known as PCB connectors, are used to connect printed circuit boards (PCBs). The PCBs are used in many electronic devices to provide a platform for the components to be mounted on and connected to each other. Board to board connectors provide a reliable and efficient way to connect these PCBs.Board to board connectors are essential components in many electronic devices and are commonly used in applications such as smartphones, tablets, cameras, and laptops. These connectors make it possible to transfer data and power between circuit boards, thus enabling the device to function as intended.One of the most important features of board to board connectors is their small size. As electronic devices have become more sophisticated, they have also become smaller and more compact. Board to board connectors make it possible to connect these devices without taking up too much space. This is essential in many applications where space is at a premium.Another important feature of board to board connectors is their ability to transmit high-speed data. With the increasing demand for high-speed data transfer, board to board connectors have become a critical component in many electronic devices. They make it possible to transfer data at rates of up to 10 Gbps. This is essential in applications such as video processing and gaming where real-time data transfer is crucial.Board to board connectors also provide a cost-effective and reliable solution for connecting electronic devices. They are easy to install and maintain and are designed to withstand the rigors of daily use. Board to board connectors are also available in a wide range of configurations to suit various applications.In addition to their use in consumer electronic devices, board to board connectors are also used in industrial and automotive applications. In the automotive industry, they are used to connect electronic modules to ensure reliable operation of the vehicle's various systems. In the industrial sector, they are used to connect control systems and automation equipment.In conclusion, board to board connectors are essential components in many electronic devices. They provide a reliable and efficient solution for connecting PCBs and enable electronic devices to function as intended. As electronic devices continue to become more sophisticated and compact, board to board connectors will play an increasingly important role in the future of electronics.
Tom Hanks and Steven Spielberg collaborate once again for a movie inspired by the real-life tale of a refugee stranded in a Paris airport.
The Female Terminal - A Pathbreaking Story of Resilience and SurvivalThe world of refugees is one of constant struggle and uncertainty. They are forced to leave their homes and families, often with nothing but the clothes on their backs, to escape violence, persecution, and war. The Female Terminal is an inspiring film that shines a light on their struggles and the power of the human spirit to triumph in the face of adversity.Inspired by the true story of a female refugee stranded in a Paris airport, The Female Terminal is a riveting tale of resilience, courage, and survival. The lead character, played by a talented and versatile actor (need to research actor name) represents all those who have suffered the indignities of being labeled an outsider, invisible to the world.The film follows her journey as she navigates the complex system of asylum and immigration. The audience is privy to the obstacles she faces, from lack of basic amenities to the heart-wrenching moments when officials try to send her back to an uncertain future.The Female Terminal is more than just a film; it is a wake-up call to the world. It highlights the callousness with which refugees are treated in many parts of the world, often regarded as mere numbers and statistics. It's a powerful reminder to the humanity that we all share.The film has gathered much-deserved attention for the excellent performances of the cast, the breathtaking visuals, and the sensitivity with which the subject handled. It is a refreshing change from the humdrum of superhero movies and mindless action flicks. As someone who has always believed in the power of art to bring about change, I can't recommend The Female Terminal enough. It's a film that deserves attention and recognition - not only for the incredible work that has gone into its making but for the impact it could have on society.To wrap it up, The Female Terminal is a landmark film, a triumphant tribute to the human spirit's power to endure and survive against all odds. It's a must-watch for anyone who cares about humanity, empathy and believes in the transformative power of art.
Get High-Quality Wire to Board Connectors for Your Project
When it comes to creating reliable electrical connections, one of the essential components is the connector. Wire to board connectors, in particular, play a significant role in connecting wires from a printed circuit board (PCB) or other electronic components to different peripheral devices, power sources, or control systems. In this blog, we’ll take a closer look at the 2.54mm pitch wire to board connectors and how they are used in various applications.A wire to board connector is primarily utilized in electronic device applications, which require reliable wire connections with a PCB. The pitch of the connector refers to the distance between each pin or terminal on the connector. Generally, a pitch of 2.54mm is considered standard in the industry and is commonly used in most electronic devices. The 2.54mm pitch wire to board connectors are available in different configurations and are suitable for various applications.
High Quality Plug-in Terminal Block Manufacturers and Suppliers in China
Shenzhen E-Chips Technology Co., Ltd. Expands Its Product Line to Include Plug-in Terminal BlocksShenzhen, China – August 20, 2021 – Shenzhen E-Chips Technology Co., Ltd., renowned Integrated Circuit (IC) manufacturer, announced today that it has expanded its product line to include high-quality Plug-in Terminal Blocks.The new line of Plug-in Terminal Blocks offers a versatile and cost-effective solution for connecting wires to a single power source. These terminal blocks are designed to fit standard industrial and electrical applications, with durability and reliability as their primary features.Shenzhen E-Chips Technology Co., Ltd. has been providing a wide array of electronic products and components for the global market. With years of experience in providing top-quality IC products, the company has now set its sights on the Plug-in Terminal Block market.The Plug-in Terminal Block product line is ideal for a broad range of uses. It caters to applications that need a sturdy and secure connection for wires, with high electrical conductivity. Terminal blocks are usually used in PCB circuits, industrial wiring, power supplies, lighting, and control cabinets.Shenzhen E-Chips Technology Co., Ltd.’s Plug-in Terminal Blocks have an easy and fast installation process, which saves users time and resources. Moreover, these terminal blocks come in both modular and standardized block types, making it easy to fit into various systems. The modular block types have a single design that can be easily assembled to fit the desired wire connection.Furthermore, Shenzhen E-Chips Technology Co., Ltd.’s Plug-in Terminal Block boasts a robust construction, providing optimum electrical conductivity and wire polarization. The terminal blocks are made of high-quality materials, including thermoplastics, copper alloys, brass, and ceramic. The surface area of the terminal blocks is coated with a protective layer that effectively resists corrosion and other forms of damage.Shenzhen E-Chips Technology Co., Ltd. is committed to providing clients with quality and reliable products, backed by excellent customer service. The company has set rigorous quality control measures to ensure that the terminal blocks satisfy industry standards and client specifications.Shenzhen E-Chips Technology Co., Ltd.’s Plug-in Terminal Blocks are an excellent and cost-effective addition to the company’s product line. The new product line brings greater diversity to the company's product offerings while providing customers with an alternative solution for their connection needs.About Shenzhen E-Chips Technology Co., Ltd.Shenzhen E-Chips Technology Co., Ltd. is a leading IC manufacturer that provides innovative and high-quality electronic products and components to clients worldwide. The company's mission is to help its clients achieve success by offering top-quality and reliable products backed by exceptional customer service. Shenzhen E-Chips Technology Co., Ltd. has a team of qualified experts dedicated to creating innovative and reliable electronic products and bringing them to market. For more information on Shenzhen E-Chips Technology Co., Ltd.’s Plug-in Terminal Blocks, please visit the company’s official website or contact them through email or phone call.
Discover High-Quality and Customizable Electric Fence Wire Joiners in China
Wire Joiners Electric Fence Systems Manufacturer Factory in China: Supplying High Quality Electric Fence SystemsWire Joiners Electric Fence Systems Manufacturer Factory in China is a professional supplier of electric fence systems and wire joiners. We are a trusted and experienced manufacturer of high-quality electric fence systems that are ideal for agricultural and domestic use.Our electric fence systems are designed to be easy to install and use, and provide reliable protection for your property and livestock. We offer a wide range of products, including wire joiners, chargers, insulators, energizers, and accessories.Our experts work diligently to ensure the highest quality of manufacturing, and we use only the best materials available. We also provide customized solutions to meet your unique needs and requirements.Key Features of Our Electric Fence SystemsOur electric fence systems are designed to meet the needs of a wide range of customers, from small-scale farmers to large-scale commercial operations. Here are some key features of our products:1. High-Quality Material: Our electric fence systems are made from high-quality material that is strong, durable, and weather-resistant.2. Easy to Use: Our electric fence systems are designed to be easy to install and use. We provide clear instructions and support to ensure you get the most out of your electric fence system.3. Customization: We offer customized solutions to meet the unique needs of each customer. Our team of experts can work with you to design an electric fence system that meets all of your needs and requirements.4. Cost-Effective: Our electric fence systems are designed to be cost-effective, providing reliable protection at an affordable price.The Benefits of Using Our Electric Fence SystemsThere are many benefits to using our electric fence systems. Here are just a few:1. Effective Protection: Our electric fence systems provide effective protection for your property and livestock, keeping them safe and secure.2. Easy to Install: Our electric fence systems are easy to install, saving you time and money on installation costs.3. Cost-Effective: Our electric fence systems are cost-effective and provide years of reliable protection for your property.4. Customization: We offer a wide range of products and customization options to meet the unique needs of each customer.Why Choose Us?There are many reasons to choose Wire Joiners Electric Fence Systems Manufacturer Factory in China as your provider of electric fence systems. Some of these include:1. High-Quality Products: We use only the best materials available and have rigorous quality control procedures in place.2. Customized Solutions: We work closely with each customer to develop customized solutions that meet their unique needs and requirements.3. Experienced Team: Our team of experts has years of experience in the design, manufacture, and installation of electric fence systems.4. Cost-Effective: Our electric fence systems are cost-effective, providing reliable protection at an affordable price.5. Fast Delivery: We have a fast delivery system to ensure that your electric fence system is delivered to you promptly and efficiently.ConclusionWire Joiners Electric Fence Systems Manufacturer Factory in China is a leading provider of high-quality electric fence systems. We are committed to providing our customers with the best products and services available, and we work closely with each customer to develop customized solutions that meet their unique needs and requirements.Our electric fence systems are designed to be easy to install, cost-effective, and provide reliable protection for your property and livestock. Contact us today to learn more about how we can help you protect your property and livestock with our electric fence systems.